Mangar Bathing Cushion (with Airflo 12 Compressor) - Adult Bath Lift

• Lifting Capacity 330 lb
• Power Source Air Pressure
• Seat Width 23"
• Seat Depth 17.5"
• Seat Height: Lowered 1.5"
• Seat Height: Raised 16"
• Backrest width: 21"
• Backrest Depth: 13"
• Suction cup diameter: 4.5"
• Air Hose Length: 5'11"
• Fabric: PU coated nylon
• Weight: Cushion: 4.4 lbs., Compressor: 10 lbs.
• Installation Method Suction Cups (distance between suction cups: 16 inches)
• Warranty: Two Year Complete

• How long does it take to fully inflate the bathing cushion?
  The bathing cushion typically inflates within 30 to 60 seconds when connected to the Airflo 12 compressor. This duration allows users to comfortably prepare for entry into the tub without feeling rushed. Inflation and deflation times can vary slightly based on user weight and cushion wear.
  
• Can the cushion be used in a walk-in tub?
  Yes, the bathing cushion can be used in most walk-in tubs as long as the base is flat and exceeds the minimum dimension requirements. Always measure your tub’s internal surface to ensure a stable and secure fit for safe operation.
  
• Is the bathing cushion waterproof?
  Absolutely. The Mangar bathing cushion is constructed from waterproof, medical-grade materials that withstand continuous water exposure. It is also resistant to mold and mildew, making it suitable for repeated use in a moist bathroom environment.
  
• Can I use it without assistance?
  Yes, most users with moderate mobility limitations can operate the cushion independently using the hand control. However, those with severe balance or strength issues may still need occasional assistance, especially when aligning themselves properly on the cushion.
  
• How often should I charge the Airflo 12 compressor?
  For regular use, we recommend charging the compressor two to three times per week. A full charge typically supports 4 to 6 full inflations and deflations, depending on user weight and water pressure.
  
  Can I sit on the cushion while it's inflating?
  No. The cushion should be fully inflated first before a user sits on it to use it as intended (to lower into the bath). Sitting on it while the compressor is pumping air (before full inflation) could interfere with proper setup and secure suction cup adherence, and it’s not part of the manufacturer’s recommended use.
  
• Is there any maintenance required for the cushion?
  Maintenance is simple. After each use, rinse the cushion with clean water and allow it to air dry. Periodically inspect the suction cups and tubing for any signs of wear or residue buildup to ensure continued safe operation.
  
• Will it puncture easily?
  No, the cushion is made of tough, medical-grade PVC that resists punctures and tears during regular use. While durable, it should not be used on sharp or abrasive surfaces without a protective layer underneath.
  
• Is it covered under warranty?
  Yes. Mangar bathing cushions generally come with a one-year manufacturer's warranty, covering defects in materials or workmanship. Always check the included warranty card or website for detailed terms.
  
• Can it be used in Jacuzzi or jetted tubs?
  Yes, it can be used in Jacuzzi or jetted tubs, provided the cushion does not obstruct the jet flow. Always position it centrally and ensure jets are not aimed directly at the cushion's seams or valves.

Note: This product is a hygienic item and can not be returned if the box has been opened.